Clean Air Tent

• Clean air tents are generally used within a CLASS 100000 clean rooms, in which a specific area where the manufacturing & processing activity is taking place.
• The ceiling provided with HEPA filters and at least 250 air changes per hour are maintained to provide an absolutely clean & CLASS 10000 inside within minutes after the system is switched on.
• The complete structure made of SS304 square tubular sections designed for withstanding the loads coming on that considering appropriate margin of safety.
• The strong castor wheels with brake provided at the bottom that enables the total unit to move from place to place.
• Jacks provided at bottom that supports the whole system

• Type : Self-Standing Mobile Facility
• Size : 4 m X 4 m X 5 m (L X B X H)
• Direction of Flow : Vertical Down flow
• Cleanliness : Overall Class 10000 (ISO 7 replaces with Class 10000-US FED STD 209 E)
• Particle Retention : 0.3 Micron & Above
• Noise Level : Less than 55 decibel on "A" scale more or less 5
• Velocity : 90 Feet/Minute more or less 20
• Differential pressure : Magnehelic Gauge 0-25 mm Imported Dwyer, U.S.A., Make or equivalent
• Illumination : by LED Tubes with Diffusers
• Accessories : Antistatic Polyurethane (PU) Flexible Curtains of 1mm thick
• Power Supply : 230V single phase, 50 Hz and 20 amps.
• Extra Power Sockets : Electrical Power Junction box provided with 5 amps & 15 Amps & Cutler
• hammer socket-each 01 no.

Material of Construction:

• Main Cabinet made from By IS 304 Grade Stainless Steel (SS 304).
  

And bottom to support with SS304 Pipe Structure with Suitable Castor wheels with Break Facility,

• Designed for load made of MUVTONS or equivalent ISI Make.
• Leveling Jacks provided for better stability and designed to take the total load considering appropriate margin of safety.
  

• Efficiency 90%
• Particle Retention 10-15micron rating
• HDPE mesh-3 layers
• 6 mm WG pressure drop

HEPA Filters

• Efficiency : 99.997%
• Particle Retention : 0.3-micron rating
• Micro Glass Fiber paper media Mini-Pleat type with 12 mm WG pressure drop.

Blower Assembly

• DIDW type blower system, which consists of dynamically & statically balanced aluminum impeller driven by a single phase.
• 1440-RPM motor, enclosed in a SS casing suitably suspended in a pair springs & connected to the filter chamber through flexible canvas duct.
• Motor and Electrical Wiring system fire proof grade.